TOTAL: $0.00 impuesto incl.Cesta
Found tutorials: 14
1. Begin the unpacking process of the crate that contains the TYTAX® machine. Open one of the sides, and take the elements from the inside to the place where you are going to assemble the machine. Then, take of the rest of the boards that build the crate.
2. The floor in the room has to be flat, even and leveled.
3. The assembly process of the TYTAX® machine has to be done by 2 adult persons!
4. REMEMBER – At the beginning, the connections have to be tightened slightly by hand. When the rest of the elements is put together, tighten all the connections.
ATTENTION: After assembly of TYTAX® machine and initial machine setting in next section below, to safely perform a training you should first watch the video from section BASICS In it, you will see how to correctly and safely use TYTAX® equipment.
TYTAX® machine elements may differ from these you see on the video. It may be caused by the fact of improving and upgrading components of the machine (it does not influence the number or quality of exercises).
- Hex keyHex key
Remember, if you have problem with unscrewing a screw with a hex key (included with TYTAX® machine), you can apply simple lever, to increase a strength as you unscrew a screw – see the video.
- Step 1Step 1
- Step 2Step 2
- Step 3Step 3
- Step 4Step 4
- Step 5Step 5
- Step 6Step 6
- Step 7Step 7
- Step 8Step 8
- Step 9Step 9
- Step 10Step 10
- Step 11Step 11
- Step 12Step 12