Instruction T3-X

INITIAL MACHINE SETTING

Found tutorials: 23

1 – Inserting H17 weight cases

Find these cases and insert them into smith machine’s sockets as shown on the video.
2 – Inserting H29 handles

Find these handles and insert them inside smith machine’s sockets as shown on the video.
3 – Where to put away upper gate pulley & H-8 handles

Put away upper gate pulleys and handles in this place/places ash shown on the video.
4 – Where to put away H50 handles

Put away handles in this place/places as shown on the video.
5 – Where to put away cable for upper pulley

Put away cable in this place / places as shown on the video.
6 – Where to put away cables for station C

Put away cable in this place / places as shown on the video.
7 – Where to put away the intermediate cable

Put away cable in this place / places as shown on the video.
8 – Where to put away cable for leg press

Put away cable in this place / places as shown on the video.
9 – Where to put away cable for butterfly arms

Put away cable in this place / places as shown on the video.
10 – Connect the cable to the cart – station C

See how to connect the cable to the cart on the station C. See which side the hitch is inserted.
11 – Locking butterfly arms

Perform this operation, like shown on the video.
12 – Connect the cable to the cart – station D

See how to connect the cable to the cart on the station D. See which side the hitch is inserted.
13 – H30 feet support

Perform this operation, like shown on the video.
14 – H54 weight case

Find this case and insert it inside this place as shown on the video.
15 – Loading weights on sleeves

16 – perform this operation, like shown on the video.
16 – Screw screws properly

Make sure to screw these screws properly.

INSTRUCTIONS FILTER

INITIAL MACHINE SETTING

TEST

Have a Question?